[kenchan]

probably will turn out the same as the previous work you did. you have to put on
a nice rich coat of clear at the very end to achieve that level of shine when you
run the compound. i mean rich as in saturated to the point it might even drip.

considering you're using a CAN with COMPRESSED AIR that VARIES IN PRESSURE as you
let the product out over a LARGE piece, i can almost guarantee you that it will turn out
like you did it. no offsense, but there is a reason why the pro's use airbrush...even
so the work vary person to person. you should have it done professionally and get it over
with.

if it's a small lip or small sills or something it'll turn out acceptable.