|
I have put my OEM tensioner but i have not put the second pulley of the Bender OEM... because not enough place with the SC pulley... I use a 62inch belt... its very tight.... i tried a 63' belt but its too loose... And i didnt find 7 RIbs Belt.... I use 6 ribs.... :S :S i check in Gates, gatorback and delco and the sizes is not available!!!BUt no more Slipping with Autotensioner... I run autotensioner ONly 1 week... its why i suspect the tension perhaps....Or perhaps i overtighted the belt when i haved the manuel tensioner...
|