|
I just finished installing the Megan in my 06 Si coupe. I noticed the same problem with the rear springs bottoming out. I personally prefer the higher level of adjustment in the Megans. In the environment that I live in with lots of rain and occasional snow. The Tein do not fair well in that those conditions. I hope that the Megan will fair a little better. Will let you guys know in a couple months.
Back to the issue of the rear bottoming. Have you considered removing the 3/4inch spacer that Megan provides? I can't quite figure out why it's there. The additional 3/4 of might allow for that the needed travel to not bottom out. The bottom of the adjustment collars and bottom of the spacer have the same dimension and same rubber isolator. The springs should in theory be able to rest against the collars just like the front springs do. The springs should be able to handle the weight of the vehicle at 10kg/mm in the rear. I'm trying to contact Megan for an answer to the question about removing the spacers.
|