[flomofo]

I'm about to order some wire after finally ordering the last few components of my system and need help to make sure I get everything I need after my setup just changed today, and if you guys have better suggestions for say a better battery terminal etc. just let me know.

Willing to get what I need the first time.

Heres the setup I'm buying wire for:
kenwood dnx 8120 h/u
kenwood kac-x4r
kenwood kac-x10d
rainbow 265.25NG (2 piece components running active)
ED 11kv.2 10" sub

And heres what I plan to order from knukonceptz:
1. kolussus 4 guage 4 channel amp kit
2. two fused distro blocks(not sure which ones but will match fuse rating in each one to the biggest max of the 2 amps) with 2 pieces of positive and negative wire that is 3 feet long in 8 guage and one more of 3 feet for grounding after connecting the first two through the second distro block so that they share a common ground?
3. set of 20 ft. rca's for the sub
4. 80ft. of twisted 16 guage speaker wire for speakers and use the 20ft. of 12 guage from the amp kit for the sub.
5. And finally some quality battery terminals(trying to find some bikini recommended on here before right now) to use this along with the big 3, and some recommended wire lengths for the big3 as well.
6. Also any tools I could use to make the job easier and where I should get them from...trying to avoid taking tools away from my dad starting my own little set needed for this project including the h/u wiring.

feel free to add or take away what you think is neccessary, trying to get whatever specific recommendations I can for our civic specifically

thx