8th Generation Honda Civic Forum - View Single Post - TSX bottom end Si k20z3 Head is this possible?

soxfan143 · 04-30-2008, 06:29 PM

The TSX block is far superior to the CR-V block. If you are going to do this spend the extra money for the TSX. The TSX has higher compression and it has the oil sqiurters in the block to cool the pistons. Which you will need for the added RPM's. Plus the higher compression will give you much more power and tourque. I would also get the 06 TSX cams to go with the block. The combination of the RBC intake manifold along with the cams and the block will kick some serious ass. this is my dream setup. Along with a turbo setup.

04-30-2008, 06:29 PM	#18 (permalink)
soxfan143 Senior Member Join Date: Nov 2007 Location: Lynnfield, MA Age: 34 Posts: 3,228 Mike iTrader: 4 / 100%	The TSX block is far superior to the CR-V block. If you are going to do this spend the extra money for the TSX. The TSX has higher compression and it has the oil sqiurters in the block to cool the pistons. Which you will need for the added RPM's. Plus the higher compression will give you much more power and tourque. I would also get the 06 TSX cams to go with the block. The combination of the RBC intake manifold along with the cams and the block will kick some serious ass. this is my dream setup. Along with a turbo setup.