Quote:
Originally Posted by Phalanx
I'll see if I can find pics of what Im talking about. When I installed mine it had a little hole w/ a plug in it on one side. i wondered what it was for and after a little bit of research I found out its for N20
|
If you put the nitrous port on the P2R gasket you will likely end up with a burned cylinder and cursing nitrous like others do because they didn't know how to handle it.
Why?
Your nitrous is injected in a high pressure rate. If the nozzle is very close to intake manifold you will not have a balanced amount of N2O distributed in all of your cylinders making one or more of them run dangerously leaner than the others.
Take your time and review your nitrous installation guide you will see that it specify that the nozzle must be almost a foot away from the throttle body. The reason is what I stated in the above paragraph.