[deaodi]

Originally Posted by deaodi

Are yours Pnp?
If it is, Recheck:
- Ground connectivity,
- Make sure the connector from the ballast
seated correctly to the oem connector, you should hear 'click' sound.
Plug not seated correctly will result high voltage spark inside
the connectors that can cause short circuit and burn the connectors.
- Check the headlight fuses.

If every connections are good, you probably have a defective hid kits. Exchange the kit.

Originally Posted by ugondie's_07SI

thanks... but as for "ground connectivity" what exactly should be done with the ballasts so that they are properly grounded?

Originally Posted by deaodi

Mine also a pnp and when I turn on, I didn't hear any static or click coming from the speakers but it starts out bright in less than a second and it dimms and then starts to heat up to a superbright and down to a little dimmer after the lights did one flick and it stays that way. Is it normal or like that? It doesn't bother me, but I just don't want to fry my harnesses. Any comments?
If its the grounding, I attached the plate holder directly to the body of the car. If its not enough, how to find/make a good ground?

Originally Posted by GETxERxDONE

well, the bracket is painted (atleast mine was) and thats what grounds it, the bracket that holds the ballast you can try and grind/scrape off the paint and reattatch it to get a better ground.
but deaodi, its a gas bulb, and when you turn them on, it ignites the gas which gives out a bright flash at first, then goes dimmer and brightens up. thats normal next time you see a bmw or something, ask the guy to turn the headlights on for you theirs do the same thing