Quote:
Originally Posted by innrfusion
honda has 2 indents on each side of the trunk for you to follow for drilling, using the unibit get the 1/4 inch side to make holes big enough for the screws to fit. you can go one more notch to 5/8's to give it more slack when your putting the spoiler on.
 |
I did the same to my car...but warning...those after market spoilers are not exact specs..so when i grew the balls to drill the holes, i realised that the "indents" were off by 2mm (spoiler was 2 mm short !! )
So I had to adjust the holes a bit and I ended up making humongous holes !!!
Alls well that ends well. Good job though !!