|
if you're driving HCH2, these are the steps but bewarn do it at your own risk
put on gloves to protect both hand and sensitive part prone to scratches
carefully push on the top edge of the mirror
there's two clip below edge of mirror, use cloth and taped flat screwdriver to pry open
there's four more side clips(center) once slowly disconnect the lower clips
release the two hooks(top) friom the actuator and disconnect the two defogger connector
remove the four inner cover screws
pull out the turn signal lamp assembly
disconnect the 2p connector
it never mention if there's bulb inside or replace the whole assembly
|