|
correct, the only way to mess up is if you dont line it up right before you stick it on. the way i would do it is line up the screw holes in the front, then line up the screw holes and the top of the back part of it then press it down. just remember, if you do mess up you can remove the rails..it wouldnt be easy, but its doable. i had to move one of mine up because it was before i perfected the method and only cut out a section in the middle of the rail for it to stick, and when i removed it to put the rest of it on i couldnt keep it straight. but with 3 points for it to stick, it wont move.
|