Quote:
Originally Posted by streetmachine02
i need help, i have these skunk 2 camber arms. they have been installed for around a year. the passanger side rear arm was making a noise, it sounded like the bushing, they were set to 5 showing threads. i took off the camber arm and set it to the stock setting. the camber was visually off, so i took off the kit and adjusted it to 2 showing threads. there is still camber so i think i need to adjust the arm further, but how far is too far?
|
Get an alignment and find out. As far as the noise, make sure you lube those bushings. Mine were whisper quiet for 7 months. Then they started making noise. I'll grease them durning the next suspension install.