Quote:
Originally Posted by CiViC-FD
Hi Guys,
If we use a belt that's about 10mm shorter, would it be of any concern? Would the tension be too stiff/tight or the tensioner would be able to offset that portion?
Would it be advisable to change back to the recommended K070760 length?
In SG, K070760 = 7PK1930. But the mechanic used 7PK1920.
Thanks.
|
You will be just fine as long as you dont hear any belt squeaking or fluttering. Keep an eye on your belt and make sure there is no belt dust near/on the pulleys and you will be good to go.
