Quote:
Originally Posted by trilobyt
I've successfully installed a set 6.5" Pioneer coaxial speakers at the rear without any problems. The trick is to elevate the speaker just a little bit (about half an inch) during mounting. You can use an mdf board for this purpose. In my DIY, since I wont be using the grills that came with the pioneer speakers, I used the frame that holds the grill as a spacer instead. This way, I didn't have to destroy the stock speakers just to use its frame for mounting my replacement speakers. I also didn't have to drill additional holes as the 3 holes that holds the stock speakers in place falls exactly aligned to the existing holes on the replacement speaker.
BTW, i have a 2007 Civic 4-door sedan.
Attachment 5985
Attachment 5986 |
Bump for making this as an sticky for replacing rear speakers on a sedan without destroying the stock ones