|
I just installed the Progress rear sway bar and reinforcment brackets! Big difference! I highly recomend the 22mm rear anti-sway bar. Now I'm thinking about putting on my 27mm solid Si sedan front sway bar in place of my stock 25.4mm hollow front bar.
One gripe that I have: The reinforcment brackets werent perfect as in the holes for the allen screws and endlink stud werent in perfect alignment. And I'm pretty sure the Si and non-Si have the same lower control arms. I got it to fit though. It was a pain.
The reinforcment brackets are a PITA to install. Especially if you DRILL a hole in your control arm! It reads drill either a 5/16" hole or a slighlty bigger 11/32" hole.
Go with the bigger one. I only drilled a hole in one control arm, I might do the other one.
Bad enough you might not drill it right, its a b*tch let me tell you!
I'll make a thread soon and post pics.
Reinforcment brackets are not bad to install, BUT IF YOU WANT TO DRILL A HOLE THEN YOU ARE MAKING IT EXTREMELY DIFFICULT FORYOURSELF. I doubt it was just me.
The Progress bar is great though.
MY oem Si rear anti-sway bar is for sale now.
Last edited by Andrei'sCivic; 03-02-2008 at 02:01 AM.
|