Initially I was only going to reveal my plans once my DIY induction box was completed, but since this thread is here...oh well.
Notes:
1) The sillicone pipes are from scilliconeintakes.com 45deg 2.5", 45deg 3" to 2.5" angle reducer & 3" straight coupler.
2) Airfilter is a K&N unit 6.5" long & has a 6" opening for a Blox intake stack.
3) The MAF holder is from Pep Boys. Features a MAF adapter I made from 1/4" basswood. I added in some fins from 0.5mm alum and epoxied(the white stuff) them in. The leading edge of both fins have been bent a little to direct more airflow into the MAF unit to compensate for the intake, headers & exhaust. I haven't as yet dynoed with a/f measuring, so the current agle of the fins is just a guess. As is I don't have any bogging or surging so I should be fine for now.
4) The throttle response is noticeably better & probably gained a few hp also.