Quote:
Originally Posted by 20strong
What if the induction ran from the sealed airbox through the plastic cover at the base of the windshield. But you put the hole on the windshield side of the plastic sinse it doest sit flush. You could probably remove a considerably sized hole there and no one but the driver would really see it.
|
You still need to run a duct to the firewall to access the high pressure area right by the windshield wiper area. Some of the holes in the black plastic are already drilled out in the wiper cowl area. A guy could just open a few more up. Then, the duct could pull air from the cowl area. I think the less cutting on the outside of the car, the better. This mod would be under the hood and would be inconspicuous if a duct was attached to the hole.