I'm not even going to bother bringing this up to the dealer when i go for the reflash. Bare with me though I know my camera sucks lolz.
So here we go!
1.Here is the rust
2. After placing a towel on the fender so I wouldn't scratch any thing.
3.I got out the old hamer and punch. (I can feel you guys cringe)
4.I tapped the pinch weld in a little bit so it wouldn't make contact with the fender.
5. I touched it up and let it dry this is what it looks like now....
6.If you look at these pix they clearly made the hood wrong.
Look at the way the corners come together on each side.
Driver side:
Passenger side:
The driverside comes more to a point then passenger side they didn't fold it over on the end!
End result I fixed it but the hood clearly is messed up.
Let me know what you guys think thanx.
