View Single Post
Old 09-25-2006, 03:58 PM   #7 (permalink)
stevieray
Senior Member
 
stevieray's Avatar
 
Join Date: Feb 2006
Location: Franklin, TN
Age: 54
Posts: 595
DP Squad Member #2
iTrader: 0 / 0%
Quote:
Originally Posted by MacPrince
I'd looked at this same kit for when I get my Civic Hybrid with navi. Thank you very much for the install walkthrough, it was excellent!

The one thing I was considering doing differently, if it doesn't involve a lot more work, is to hide the microphone in the overhead console where the stock navi microphone (I'm guessing) is. Tapping the navi microphone had also occurred to me, but then I realized that would get very messy very quickly.
Thanks. I thought about that but there's no room in there for a second mic. It's still mounted on the mirror but I brought it down to the edge where heat doesn't wear on the adhesive so much. I also redid how I had the Parrot brain and the mute harness mounted under the dash since it was making rubbing noises. Took it all apart, wrapped everything in EPT foam tape and rerouted the harnesses so everything is much cleaner and there's no strain on them. Think I'm finally finished with it.

Now if I can just isolate the rattling in the driver's side A pillar, I'll be set.
stevieray is offline   Reply With Quote