Quote:
Originally Posted by Jimmysaintjames
they are super easy to replace. You must have cross threaded the old ones. you would have to REALLY over tighten them to break them. But anyway all you really do is remove the rotors and hammer out the old stud. If not enough stud left to hammer use a punch or something. insert the new stud and put a lug nut on it and tighten it down to draw the stud through. you may have to usa a few washers under the lug nut as there may not be threads all the way down. make sure you dont cross thread it or over tighten it again. and you should be good.
|
yup what he said just support the rotor some how pound out the old one be careful not to hit the rotor with the hammer and use a lug nut and some washers or something like that thats pretty much the sameway they do it at the dealer or any other shop too schould only take you like 30 min or so