8th Generation Honda Civic Forum - View Single Post

jbsali · 02-05-2008, 07:31 PM

I'm going to install this muffler on my car because i don't want to drop a mint on the catback for my LX. Do i have to worry about anything if im installing a axleback? ex. Is the hanger an odd shape? i was just going to get a custom pipe made and just weld the muffler on. I was going to buy the same hanger i used on my 92 SI. It's just a really big hose clamp that came with a bar you put between the muffler and the clamp and when you tighten the clamp the bar would bend to the shape of the muffler. Then you just screw the hanger parts in whichever hole is positioned the closest to where you would hang it. It worked great in my last civic (1992). Will i run into any problems? ALSO... should i go the 76mm or the 60mm? Pros and Cons of both would be great! Thanks in advance!!

02-05-2008, 07:31 PM	#1 (permalink)
jbsali Senior Member Join Date: Dec 2007 Location: Lower Mainland/ Greater Vancouver Age: 22 Posts: 4,396 Joel	Skunk2 Muffler I'm going to install this muffler on my car because i don't want to drop a mint on the catback for my LX. Do i have to worry about anything if im installing a axleback? ex. Is the hanger an odd shape? i was just going to get a custom pipe made and just weld the muffler on. I was going to buy the same hanger i used on my 92 SI. It's just a really big hose clamp that came with a bar you put between the muffler and the clamp and when you tighten the clamp the bar would bend to the shape of the muffler. Then you just screw the hanger parts in whichever hole is positioned the closest to where you would hang it. It worked great in my last civic (1992). Will i run into any problems? ALSO... should i go the 76mm or the 60mm? Pros and Cons of both would be great! Thanks in advance!!
	Tweet