|
wow...I was doing my fogs, and I had to make my own screw to ground near the wiper fluid. later i was trying to figure out what is wrong, and i put a tester in the female 6 pin connector and there was a small spark. After that I am not getting any power to my fog light switch, and i was getting power before. I checked the wiring and the red/white wire, has power going from the white 20 pin connector, to the relay harness, and the other 3 connectors dont have any power. is this the relay that is the problem? I think i need a new one. im not getting any power anywhere after the relay. thanks....oh..i redid my ground , and grounded it to the other spot where there is two wires already grounded next to the wiper fluid tank...(thanks gui)!
|