8th Generation Honda Civic Forum - View Single Post - How to install Strut King's break Sport Pedals(AT)???

HeLLz aNgeL · 01-09-2008, 10:30 PM

i just did this yesterday .... was a PITA...

1. remove the brake pedal rubber cover
2. you dont need to enlarge the holes(like the si owners have to do)
3. place the rubber insert and and strutking pedal on the stripped brake pedal
4. now the tricky part .... use a wrench (i used narrow pliers i found in my room) to hold the round thingys that the screw goes into
5. hold that behind the brake pedal and use a screwdriver from the front to screw it in

might work well if you have a friend to help you out ... took me a couple of hours and tired arms to get it done on my own

use this for guidelines:

http://www.8thcivic.com/forums/do-yo...step-pics.html

hope this helps

01-09-2008, 10:30 PM	#2 (permalink)
HeLLz aNgeL Senior Member Join Date: Sep 2006 Posts: 105	i just did this yesterday .... was a PITA... 1. remove the brake pedal rubber cover 2. you dont need to enlarge the holes(like the si owners have to do) 3. place the rubber insert and and strutking pedal on the stripped brake pedal 4. now the tricky part .... use a wrench (i used narrow pliers i found in my room) to hold the round thingys that the screw goes into 5. hold that behind the brake pedal and use a screwdriver from the front to screw it in might work well if you have a friend to help you out ... took me a couple of hours and tired arms to get it done on my own use this for guidelines: http://www.8thcivic.com/forums/do-yo...step-pics.html hope this helps