|
Just a fyi on the replacement white cap. I put the white cap on the SS today and saw that I couldn't get the shifter into 2nd, 4th, 6th and Reverse. I took it back off and noticed that the white cap is slightly thicker on the top than the blue cap, so the shifter arms would stick out a few mm farther and hit the shifter base not allowing to engage into those gears.
Easy fix would be to swap the other blue cap from the left side, put that one on the lower SS nub and put the white cap on the left nub since it wouldn't matter if it was a tiny bit taller since there isn't anything to impede the shifter.
Anyways, it should be all set now. I appreciate the fast response it getting out the replacement cap. Thanks
|