Quote:
Originally Posted by Zapachi
For the mid range, I'll stay close to the optimal flat region of the frequency response curve of the driver. I think 60Hz is a little low, will push it up to 125Hz-150Hz range, that way, you can crank up the volume with less distortion when the bass notes hit. On the high side, bring it down slightly to 3k to blend with the tweeter roll-off.
Tweeter looks ok as long as you keep using the steep filter (24db/octave).
For the sub, I would dial it down a bit, to say 100-125Hz so you won't be able to pin- point the location of the sub. You can also play with the phase 0 or 180 (not sure if the 3sixty supports this) to get optimal performance.
But most of all, play with the settings until you find a good balance in freq response and sound stage.
|
Sounds like good advise... Will experience with this and see how. Cheers!