Quote:
Originally Posted by FA1user
Since I work For Valley Honda I had some spare time today to try this out. I went to Acura and purchased two keys. A TL and RDX, I cut the RDX with the key machine and then took it and the HDS out to the car.
The hard part was following the directions after multiple attempts to program the key I finally did it. The secret was telling the HDS ALL KEYS LOST. This erases all the keys and fobs and then reprograms all the keys and fobs. Since I left my valet key at home I have to redo this process again so make sure you have all the keys with you when you do this. There is a step during the key relearn process that tells you to click the lock buttons of all the key fobs.
After doing the relearn process all keys and key fobs work with car. The only sucky thing is the no trunk button. . . which I'm working on trying to figure out. Good Luck
|
Well,...
I am in Thailand and got the problem when I was programming the US Civic Ex key to my CIVIC'07. The key can start the engine and run (immo is good) but the remote is not work (The same problem with ethlar on RDX).
So I was wondering that if "FA1user" or anyone could give me a suggestion on following point.
* Does the US key use the different frequency from my key?
* Is the correct procedure important to program the key?
FA1user; It would be nice and useful if you could explain the detailed procedure to program the key with HDS so I could bring it to the dealer.
Thank you