8th Generation Honda Civic Forum - View Single Post - DIY: Convert 9005 bulb to fit 9006 harness. Increase visibility!
View Single Post
Old 11-17-2007, 07:11 PM   #6 (permalink)
truflip
VIP Member

 
truflip's Avatar
 
Join Date: Dec 2006
Location: Ottawa, ON
Posts: 12,328
karlitO
Quote:
Originally Posted by Chase View Post
wow that looks good, almost like HID output +1 for coolness..
Thanks!
Quote:
Originally Posted by Zeuceone View Post
Nice write up.
Thank you
Quote:
Originally Posted by dentrecords View Post
good stuff.. added to index
Cool! Thanks!
Quote:
Originally Posted by Firestrife View Post
Just curious, Are you sure it wont effect the wiring or anything because 10 watts more power is quite a difference on the power drain.
No, I'm not sure and I forgot to mention it. However I'm quite confident it won't drain the harness. I've seen the same mod done on older Acura's, Accords, BMW 3 series.. Toyotas etc.. and no issues.

I figured the harness going into the 9006 and 9005 are coming from one source.. that it should be ok. I check on the wiring after driving at night for 40 minutes and it looks and feels fine
truflip is offline   Reply With Quote