Quote:
Originally Posted by Jza
If you connect the PAC's black wire to the brown wire on the harness, is that sufficient kicker? Or does the PAC black wire and the harness brown wire have to be connected to another different ground wire, like the one in the radio harness. Let me know if you don't understand what I mean.
I thought the brown wire in the harness was a ground wire. Your diagram doesn't exactly say PAC black wire to harness brown, it just says each of them go to ground. It'd be cleaner if black to brown and you're done. Just don't want to tie those 2 wires to the black wire in the radio harness if I do not have to. Nice DIY sir, stop giving me credit, I don't know what the hell I'm doing.
|
yeah u can connect the black (PAC interface wire) and brown (Honda harness wire) together then ground it... I ground them in the same ground as the radio. So it doesn't matter.
As long as the brown wire (from Honda harness) and the Black (PAC interface wire) are both grounded then your good to go.