8th Generation Honda Civic Forum - View Single Post

kicker_jace · 11-15-2007, 10:15 PM

Here's my "Do-It-Yourself" install of PAC Steering Wheel Interface for an aftermarket headunit.

Materials & Tools
- PAC SWI-PS (for Pioneer and Sony headunits with Wired Remote Input)
- Electrical tape
- Wire Stripper/Crimper
- 5100 ohm or 5.1 K ohm resistor *green-brown-red-gold order color*
(included in the package)
- Extra Ground wire
- T-Taps or Wire Splicer

Just follow the Diagrams and Picture in connecting the wires.

If you have questions about the install just PM me.

Thanks to Jza & Quality_Sound for the info.

11-15-2007, 10:15 PM	#1 (permalink)
kicker_jace Senior Member Join Date: Nov 2005 Location: Staten Island, NY Age: 23 Posts: 857 Jayson	DIY : PAC Steering Wheel Interface Here's my "Do-It-Yourself" install of PAC Steering Wheel Interface for an aftermarket headunit. Materials & Tools - PAC SWI-PS (for Pioneer and Sony headunits with Wired Remote Input) - Electrical tape - Wire Stripper/Crimper - 5100 ohm or 5.1 K ohm resistor green-brown-red-gold order color (included in the package) - Extra Ground wire - T-Taps or Wire Splicer Just follow the Diagrams and Picture in connecting the wires. If you have questions about the install just PM me. Thanks to Jza & Quality_Sound for the info. Last edited by kicker_jace; 11-15-2007 at 10:20 PM.
	Tweet