Quote:
|
Originally Posted by ley
Mine just got done this morning. Its not as hard as this DIY makes it out to be, especially if you have the right tools.
-You don't have to completely remove your intake, just disconnect it.
-You don't have to take off the front frame bracket, the OP just did it to make it easier for himself.
Make sure you drain the coolant. If you do this without draining the coolant, not only will it leak everywhere, but you might get an air bubble inside, and then your car will start revving up by itself. We had this problem on a 2003 RSX-S we did the IMG for.
Took 1 hour and a half.
|
Thanks for your help guys. I am going to drain the coolant before I do this anyway but I'm a little confused about the air bubble that would have my car rev. Air bubble where? And it causes it to rev?