Post some pics of what you did, or didn't do.
Or refer to the other intake DIYs and look at the multitude of instructions including the set that came with your intake and try to figure it out. Are you sure the piece you are referring to is called a "brass piping"?
From what I remember about the coolant hose is that you get one hose, the long skinny one. It connects to where the old coolant hose connected. Using the same clips to hold it on.
Where did you go wrong? What I mean to say is I'm trying to figure out how you didn't follow the directions and decided to just reconnect the old hose, and leave it dangling.
Quote:
|
Originally Posted by 2evolved
What do you guys do with that brass piping connected to the throttle body? I just pulling one side out and coolant was gushing so I just ended up reconnecting it but does it just dangle between your intake?
When you guys are starting from a stop and start moving do you here like a Pssss Pssss sound? I'm not sure if I'm leaking air or not or this is suppose to sound like this.
Plz advise Thanks.
|
Secondly, did you tighten all your connections. Did you make sure that the new pipe is inserted fully? Can you double check? What about having a friend rev your car while you have your head under the hood? Can you identify the region where the sound comes from?
P.S. When you are under the hood with the car on, please don't stick your hand in to the fan.
