I just did this project today, after reading this DIY completely. Q, damn good write-up.
I didn't remove the front bracket, I didn't want to deal with that, I just struggled with various extensions and funny angles, because I figured that would take just as long. :)
Quote:
|
Originally Posted by dentrecords
Thanks for the write up.. exactly what I ended up doing with that clamp. I ended up using a dremel to get the original off!!!
I wish I'd seen the recommendation (or at least thought of it) to remove that front bracket.. getting at a few of those bolts was a real challenge.. to say the least.
the left bolt coming out of the block had to be shaved by a thread or so simply to get the manifold off. Great write up man, you have rep.
|
I used the dremel idea as well. thanks for that tidbit! I almost had to shave the left bolt as well, but I was able to twist the Intake manifold up and counterclockwise enough that it finally came loose.
I didn't bypass any coolant lines, and I don't notice any difference in temperature of the IM between how it used to be and how it is now. What lines did you guys bypass, or reroute? anyone have a picture?