Installed my fogs yesterday, thanks for the DIY - wouldn't have done it without seeing it first. Hardest part was plugging in that 1 pin connector located behind the washer fluid reservoir (I don't know if I didn't remove something I was supposed to, but I could only fit one hand up there to free it from the tape, hold it, and plug it in - took a few tries to say the least
). Was looking around for proper aiming and found this:
"These fog/foul weather light aiming instructions are suggestions taken from common practice and the S.A.E. standard J583. Some modifications to these instructions may be necessary to minimize glare.
Visual aim is made with the top of the beam 4 inches below the lamp center at 25 feet with the lamp facing straight forward. (See below.)"
http://www.piaa.com/Lamps/LightAimingGuide.html Also has a diagram.