8th Generation Honda Civic Forum - View Single Post - Archull's 06' RSX-S, dumped on volks

archull · 09-02-2007, 12:03 AM

ok guys, after a really really long wait. I finally had my custom build turbo kit delivered to me yesterday. I still have to buy a few more parts before I install it but here is a little teaser of the stuff that I got:

Here is a breakdown of the kit:

T3/44 Sidemount stainless steel Turbo Manifold (Coated by HPC)
44mm Dumptube (Coated by HPC)
3" Stainless 2 pc downpipe w v-band (Coated by HPC)
Garrett GT3076 turbo (.82 AR, .60trim, S-cover)(Exhaust housing Coated by HPC)
Tial 44mm Wastegate
Tial 50mm Blow off valve
PWR 6" x 23.5" x 3" vertical flow intercooler core(total height is 12") (anodized black)
2.5" Aluminum chargepipe kit with PWR Silicon Couplers & t-bolt clamps (Piping powder coated black)
Steel braided oil/feed return lines
All installation hardware, gaskets, & heatwrap
K&N Intake filter

Besides these parts that came with the kit I am going to be running the following:

Hondata Kpro
RC 750cc injectors
GM 3bar map sensor
GM boost control solenoid
Peakboost Vac Block
Peakboost battery tray
Odyssey battery
Innovative Motor Mounts
CC stage 4 clutch
Oil sandwich plate adapter
hondata intake manifold gasket
Thermal 3" exhaust
NKG BKR8EIX plugs

I know that I am forgetting some of the other stuff but this is what I remember off the top of my head.

09-02-2007, 12:03 AM	#127 (permalink)
archull Senior Member Join Date: Jan 2007 Location: Lafayette, LA Posts: 177 Brandon	ok guys, after a really really long wait. I finally had my custom build turbo kit delivered to me yesterday. I still have to buy a few more parts before I install it but here is a little teaser of the stuff that I got: Here is a breakdown of the kit: T3/44 Sidemount stainless steel Turbo Manifold (Coated by HPC) 44mm Dumptube (Coated by HPC) 3" Stainless 2 pc downpipe w v-band (Coated by HPC) Garrett GT3076 turbo (.82 AR, .60trim, S-cover)(Exhaust housing Coated by HPC) Tial 44mm Wastegate Tial 50mm Blow off valve PWR 6" x 23.5" x 3" vertical flow intercooler core(total height is 12") (anodized black) 2.5" Aluminum chargepipe kit with PWR Silicon Couplers & t-bolt clamps (Piping powder coated black) Steel braided oil/feed return lines All installation hardware, gaskets, & heatwrap K&N Intake filter Besides these parts that came with the kit I am going to be running the following: Hondata Kpro RC 750cc injectors GM 3bar map sensor GM boost control solenoid Peakboost Vac Block Peakboost battery tray Odyssey battery Innovative Motor Mounts CC stage 4 clutch Oil sandwich plate adapter hondata intake manifold gasket Thermal 3" exhaust NKG BKR8EIX plugs I know that I am forgetting some of the other stuff but this is what I remember off the top of my head.