Quote:
|
Originally Posted by fastertyper
nice drop...have any pics installing the edfc? was it hard...any tips or comments about it?
|
As far as just the wiring? It wasn't cake to install since there seems to be a lack of holes in the firewall, so I had to make my own. I drilled a 7/8" hole (will be used for all wiring) where I found a clearing on both sides, which was above and to the left of the gas pedal. Be extremely careful to know that you have clearance on both sides... you don't want to drill into the brake booster or anything.
after that it wasn't hard running the wires and getting it hooked up. I just wired it into the fuse box making sure of the constant power, acc power, ect and used a preexisting ground. In the pic I don't show it mounted yet. I just took the panel off from behind the upper storage compartment on the center console and cut some room in it for the wires to fit thru, then reattached and used double sided velcro tape to hold it up. you have to use the tape in at least two areas on the top of it for it to stick and hold up properly. The first time I did it I only used it in the front and it wouldn't hold.