Quote:
|
Originally Posted by Rba007
I must be the only retard in the world who cant get this to work... I purchased the 'low tone' horn from autozone yesterday. Today, I cut off the original connector, removed the original horn and mounted the new one. It is not a one wire connection, it also has a ground which according to the very poor instructions can simply be grounded to the stud which the horn itself mounts on. So after crimping the power wire, i get nothing. Im pretty stumped, and now I cant get the original horn to work either. I checked the one fuse that i can find for the horn which is under the hood, and it is fine. Any thoughts??
|
It shorted just like mine did. The dealer had to remove the center console and charge me 200 bucks. My VSA fuse, horn fuse, cruise and brake fuses were all blown just because of my horn. Trust me, if you install an aftermarket horn put a fuse on that wire before your aftermarket horn because it all ties into the ecu.