thanks for the help, another question , since last night staying up and fiddling all night...
1. was originally connected to the fog light harness (the one that connects the two fog lights) i unhooked it and connect the fog light harness to the brown connector in the front left where the washer tank is. ( i made it fit now)
so does that mean 1. should now be connected to the the brown connector under the dash?
(side question: the two brown connectors pre install by honda to serve as the power line running across the firewall?)
2. i will look into this one.. I was looking at the 07 installation guide of the OEM fog lights.. and it mention to pull out the white 34pin connector. and put in the red/white wire into the top slot and the blue wire into the bottom
slot (
http://www.handa-accessories.com/civic/072drfogs.pdf) page9. however my harness dont come in those color so what i attempt last night was ..
asuming that 3 was the replacement for blue wire and 2 was the replacement for red/white wire. would that be correct.
i hope i dont confuse you guys, but i trying to explain it so that we are not confuse about what wires are what.
btw.. can any one tell me what the slots are for? like the slot for the red/white wire... what is it function?
and what about the blue wire?
also ...base on what Truflip.. if i use wire 2 as he said.. to plug it in the fuse box.. whats is it function?
maybe i got my wires mixed up... some how.
thanks for the help i be checking all day today.. cuz i need to finish this project school start monday.... grrrrrrrrr