Quote:
|
Originally Posted by NighHawk8Gen
I don't understand why everyone is so set on using the stock amp. The aftermarket deck is WAY better of an amp. Just wire the connections appropriatley and wire the amp to turn on. Thats all you have to do. I have had three different decks in my car and none gave me problems. I just wired the aftermarket harness to the deck and plugged it in. As long as you power the amp up you will be good to go.
|
Are you talking about running the HU's powered outputs into the OEM amp? All that'll do is give you more voltage into the OEM amp. That may or may not be an issue depending on how much voltage the amp will accept. Running the line level outputs into the OEM amp is a better idea because the output SHOULD be cleaner but some low end HUs tap the line level outputs AFTER the built in amp which kinda defeats the purpose.
What HUs are everybody using when they do this? I'm going to toss my Clarion DRZ9255 in once I get the dash parts in and I'll report back if there are any problems.