8th Generation Honda Civic Forum - View Single Post - P2R Throttle Body Spacer dyno with I/H/E??

jsb03f · 07-19-2007, 05:59 PM

the spacer is probably getting heat soaked after the first run on the dyno, hence why no gains were seen in later pulls. Mabye with the special gaskets from corsport, on either side of spacer, it would eliminate this problem a little. Personally its an ok idea, but made of the wrong material.

07-19-2007, 05:59 PM	#8 (permalink)
jsb03f Senior Member Join Date: Feb 2007 Location: Boca Raton Posts: 1,085 Josh	the spacer is probably getting heat soaked after the first run on the dyno, hence why no gains were seen in later pulls. Mabye with the special gaskets from corsport, on either side of spacer, it would eliminate this problem a little. Personally its an ok idea, but made of the wrong material.