Ok guys, I haven't been on here for quite awhile.
I had sold my old turbo setup and ordered a peakboost kit. When I originally agreed to purchase the kit they were still in the testing phase. My wait is about over. Here are a few pics of my manifold before they sent it out to get Ceramic coated by HPC:
Here are the specs on the kit:
Quote:
|
Originally Posted by peakboost
Here is a breakdown of the kit:
T3/44 Manifold
44mm Dumptube
3" Stainless 2 pc downpipe w/ v-band
Tial 44mm Wastegate
Tial 50mm Blow off valve
PWR 6" x 23.5" x 3" vertical flow intercooler core(total height is 12")
2.5" Aluminum chargepipe kit with hoses & t-bolt clamps
Steel braided oil/feed return lines
All installation hardware & gaskets
Installation Instructions
Optional water lines with ball bearing turbo upgrade.
GT3076R 60 trim
|
I have to wait a few more weeks for the rest of the components to be finished and sent off to get ceramic coated and my intercooler to be anodized then it is time to install all of my ****.
I need to make some money on the side to get this project finished and tuned though.