Quote:
|
Originally Posted by mrk
And what do the blue and white/red wires do exactly? Because they aren't included in the k2 harness...
|
I think those are used to light up the fog light icon on the dash (by the tach)
Note the ribbed harness going to the right (that goes to the relay)
The one going down goes to the rest of the K2 Harness
The last one going to the left goes to the on off switch (see 2nd pic)
on/off switch harness (green):
Next is the relay area. We'll have a look at the harder stuff in a bit
starting from the top side:
Ok this is the other "Y Section"
note the red/white wire. I think you might've already done this part?
going under is the 6 pin connector.
this cord is unused.
I hope this helps and that its not too confusing. If so let me know, I can probably compile a collage type picture for yea to show you were things go
Quote:
|
Originally Posted by mrk
Thanks man, you're a life saver.
|
No problem! Im glad to help =)