Quote:
|
Originally Posted by robinsonda1
I finally got mine and I just finished putting them in. The problem I had was the drivers side bulb didn't want to go in to the housing. The passenger side went it fine, I put it in the housing twisted and it snapped in plce. On the drivers side it will not go in to the housing all the way so I can't get it to snap in. I have it in there now just half assed and hoping that if I hit a bump it won't fall out. Anyone else have this issue? Any advice?
|
You should check the base of the bulb to see if it is too large for the socket. I helped a local guy and unfortunately both his bulbs weren't going into the socket because of the base being too large. You can see where it is grinding as we're trying to force it in. If that's the case, file or sand it down gradually and test fit it. You don't want to sand it down too much or else it'll start moving in the socket.