8th Generation Honda Civic Forum - View Single Post - DIY: Throttle Body coolant by-pass...

mO 64 StAnG 06 · 07-01-2007, 01:02 PM

It's very simple.
-Find the two hose's on the TB and follow where they connect to.

-Remove just one hose completely.

-With the one still left on, Remove the end on the TB and route that line (while still connected to the engine) to the other port on the engine. (Where you removed the previous hose from).

-With the one you have left over it, modify it or whatever and connect the two ports on the TB together.

So basically you are just connecting the two engine ports together with one of the hose's, and the TB with the other.

07-01-2007, 01:02 PM	#81 (permalink)
mO 64 StAnG 06 Senior Member Join Date: Jan 2007 Location: Wylie, Texas Age: 23 Posts: 3,983	It's very simple. -Find the two hose's on the TB and follow where they connect to. -Remove just one hose completely. -With the one still left on, Remove the end on the TB and route that line (while still connected to the engine) to the other port on the engine. (Where you removed the previous hose from). -With the one you have left over it, modify it or whatever and connect the two ports on the TB together. So basically you are just connecting the two engine ports together with one of the hose's, and the TB with the other.