[ex5coupe]

i have seen people modifiying the factory box, so i put a twist on it.

you notice how when people hack the resonator at the bottom they no longer have a place to mount the tube, well all you have to do is cut the resonator in half its made in two pieces from the factory than glued together.

cut the half off that doesnt have the pipe running into it, inside the resonator you can notice that there is a "water trap" like what you have under a sink on the drain.

you cut that off make it smooth on the edges and leave the top half of the tube connected.

at this point now you can both keep the stock upper tube snorkel intact as well as keeping both the two bolts so you have a place to mount, so you dont have to worry about the lower section falling off. also the fact that the other half the box is there as well as half the bottom ensures that no water splash or unnecessary debris can make its way to the tube. sounds great and works real good, i should have taken pictures and i know its worthless without them but oh well